This Siemens PLC Trainer is great for PLC programming training as we designed the PLC Trainers using actual Simatic S7-200 PLC and provide Siemens ladder logic examples. If you or your company already have MicroWIN 4 software (Simatic Step 7 software) you can order the Siemens S7-200 PLC Trainer without programming software to make it more affordable. This educational equipment is at the lowest price possible to help job hunters who know higher education equals higher pay. Individual price is set at the same low price we currently give to Schools, Corporations and Government for large volume purchases.

This Siemens Training kit has a Siemens PLC (Simatic S7-200) and can be ordered with everything you need to start programming. If you already have Step 7 MicroWIN 4, you can order without the MicroWIN 4 below.

Includes ... 

• 1 Siemens PLC - Simatic S7-200

• 1 Siemens Training Module

  • 4 discrete inputs pre-wired

  • 4 discrete outputs pre-wired

• Power switch

• Siemens Programming Cable USB Adapter

• Siemens PC/PPI communication cable (Replaces 6ES7 901-3DB30-0XA0 )

• Power Supply

• 4 Siemens Ladder Logic Examples

• 7 Seimens Training Lesson on CD

• Optional Step 7 MicroWIN 4 Siemens programming software

The included series of lessons are for the beginner programmer just learning how to program and the seasoned engineer that is looking to improve their skills. We cover everything from simple pointers to advanced moves and data manipulation.  We are trying to teach you something you can not get in a manuals, but recommend you read them too.

Lessons and Siemens PLC Ladder Logic Examples:

• • Lesson 1: Basics - A Simple Latch Circuit Example. Basics of creating, editing and downloading a PLC program.

  • Lesson 2: More Basics. PLC Software Tips like finding instruction help,  S7 200 Symbol Table , split screen, the start program status chart and other processor status files.

  • Lesson 3: PLC Scan Cycle. How the PLC's looks at the logic and real world inputs and outputs.

  • Lesson 4: An Event Recorder PLC Program. In this lesson we will cover on how to record and play back (in sequence) an event or series of actions (inputs) then play them back as outputs. You will be recording up to 20 events, using the MOVE, TABLE, COUNTER and BIT instructions. Includes PLC ladder logic example to use in PLC. (.mwp file)

  • Lesson 5: Grinding Machine PLC Program. This lesson simulates a grinding machine by running a table up and down and into the grinder (resurfacing grinder). Includes PLC ladder logic example to use in PLC. (.mwp file)

  • Lesson 6: Tracking Parts on a Conveyor Line. Learn how to track a part that is moving down a production line or conveyor with the PLC, by tracking parts you can determine when to remove a rejected part for example. Includes PLC ladder logic example to use in PLC. (.mwp file)

  • Lesson 7: Pump Sequence PLC Program. Turn on and rotate vacuum pumps depending on the wear (hrs ran) and the need from production. Pump Sequencing, you will learn how to program a series of pumps and have them automatically cycle on and off (one at a time), so you keep even ware on the pumps and cycle them depending on and off depending on the pressure switch settings. Great introduction to real world of PLC programming and trouble shooting. Includes PLC ladder logic example to use in PLC. (.mwp file)

Siemens training material is in PDF lessons and in rung descriptions of actual PLC ladder logic example files. (.mwp) Siemens PLC ladder logic examples have well documented rungs so you can follow the program and see the reasoning for everything.

Shipping cost included in price below. prices are total cost delivered.

Within 24 hours an email with shipping info will be sent. You must include shipping address when ordering, or email it to us to avoid delays. All orders shipped USPS, no PO boxes allowed.